Price list of printed wiring boards
1. Manufacturing film:
- From Gerber RS274X format file: 5.90 HUF/cm2. The price of the film is calculated by enlarging the board area with a 5 mm wide technological frame.
- Depending on the ordered quantity and board size, we prepare panelised film taking technological and customer’s viewpoint into consideration, which we charge to the customer.
2. Double-sided printed wiring boards with plated through-holes and bright tin surface finish:
- Attention! The finished hole size will be cca. 0.1 mm less than the diameter of the drilling tool given in the drilling file. Please indicate, if you provide final hole diameters!
- The prices refer to an area that is calculated by enlarging the NET area with 5 mm wide technological frame.
- The prices in the table are in HUF/cm2, excluding 27% VAT.
|Quantity [pcs]||1 working day||2 working day||3 working day||5 working day||10 working day||15 working day
- The price of single-sided printed wiring boards is the 75% of those listed in the table.
- Concerning the ordering lead time, please read points 3. and 6.
- The valid price for single- and double-sided printed wiring boards is 4 900 HUF, per type in case the calculated price based on the above table is lower than this amount.
- Below 0.25 mm resolution 15%, below 0.7 mm hole diameter 15%, and below 0.4 mm hole diameter 30% additional cost is charged.
- Board thicknesses are: 0.2, 0.25, 0.4, 0.5, 0.8, 1.0, 1.2, 1.55, 2.0, 2.5 mm. Below 0.5 mm and at 2.0 mm thickness 20% and at 2.5 mm thickness 30% additional cost is charged.
3. Multilayer printed wiring boards with plated through-holes and bright tin surface finish:
- The prices in the table should be multiplied with the following factors depending on the number of layers:
3–4 layers: 3.5; 5–6 layers: 5.5; 7–8 layers: 8.0. Minimum price of multilayer boards is 19 900 HUF, if the calculated price (based on the before mentioned factors) is lower than this amount.
- Multilayer boards cannot be ordered in less than 3 working days lead time.
4. Photosensitive solder mask coating and legend:
- Solder mask coating and/or legend in green or white colour 950 HUF + each solder mask layer is 1.29 HUF/cm2, + each legend is 1.40 HUF/cm2.
- Surcharge of black, blue, red or yellow colour solder mask coating is 900 HUF + each solder mask layer is 0.95 HUF/cm2 additionally to the previous point, surcharge of coloured legend is 950 HUF + each legend is 0.95 HUF/cm2 additionally to the previous point.
- Contour milling 59 HUF/dm, contour cutting 26 HUF/dm.
6. Selective finishes, surface treatment:
- Surcharge of selective silver finish is 1 800 HUF + 5.90 HUF/cm2. Printed wiring boards with silver surface finish cannot be ordered in less than 2 working days lead time. Surcharge of copper pour is 1 600 HUF + 2.40 HUF/cm2.
7. Additional costs:
- Packing, posting: 900 HUF.
Takeover of finished products: 1111 Budapest, Egry József u. 18. Building V1, heading down half floor from the hall, and by pushing button 1 of the entryphone at the grey door.
Valid from: 16th of February, 2015.